This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. (2) this device must accept any interference received, including interference that may cause undesired operation. (1) This device may not cause harmful interference, and Operation is subject to the following two conditions: Internet connection is required to download the latest CORSAIR iCUE software at This device complies with Part 15 of the FCC Rules.Connect the SATA power connector to any available SATA connector from your power supply.Plug the USB cable from the Commander PRO into an available internal USB 2.0 header on your PC’s motherboard (refer to your motherboard manual for location).Ensure that these devices are properly powered (see device manual). Connect compatible iCUE components such as the Lighting Node PRO (sold separately) into an available 9-pin USB 2.0 header on the Commander PRO.WARNING! Please refrain from mounting the strips on components (HDD, SSD) that are sensitive to magnets. Alternatively, connect your CORSAIR RGB fans to the Commander PRO via the RGB LED hub (sold separately) using the supplied RGB LED hub cables. OPTIONAL: Connect the individually addressable RGB LED strips (sold separately) to the 3-pin connectors labeled “LED 1-2”.Since the thermal sensors can easily be repositioned, you can try various locations and use what works best for you. You may find it useful to mount the thermal sensors near air intake and exhaust points, and if your PC case has multiple compartments, you can try placing each of the sensors in its own compartment. TIP: The thermal sensors are designed to measure ambient temperatures, so for the most accurate results, they should not directly touch components. Connect the thermal sensors to the 2-pin headers labeled “Temp 1-4”.The included fan extension cables can be used if necessary. Connect any 3-pin or 4-pin fans you wish to control into the 4-pin headers labeled “Fans 1-6”.Adhere it onto the desired location with the double-sided tape. Locate an area to mount your Commander PRO.Turn your system off for the installation of your Commander PRO.Low profile design: Slim form factor means it can be installed anywhere in your case. Two USB 2.0 internal headers: Connect up to two additional USB 2.0 devices while only occupying one USB 2.0 header on your motherboard.įour thermistor inputs: Monitor temperature in different locations throughout your system.ĬORSAIR Link software support: Manage and control the devices connected to the Commander PRO through our intuitive CORSAIR Link software. Six 4-pin fan ports with voltage and PWM control: Control 3-pin and 4-pin fans manually or automatically easily and effectively through the intuitive CORSAIR Link software.ĭual channel lighting: Add an assortment of RGB lighting with individually addressable RGB LED strips (sold separately) and unleash the full RGB potential of the HD RGB/SP RGB fans (sold separately). Manage and control all of these devices through the intuitive CORSAIR Link software. Absolute Control: The CORSAIR Commander PRO is an all-in-one device that provides control and monitoring for up to 6 case fans, 4 temperature inputs, 8 individually addressable RGB LED strips, 12 HD RGB or SP RGB fans (sold separately), and 4 USB components. RGB fan per channel:6 through 1 RGB LED hub CORSAIR Commander PRO CL-9011110-WW Digital Fan and RGB Lighting Controller
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |